industrial-safety-simulatorlisted

# Skill: Industrial Safety Simulator ## Intent Ensure industrial, manufacturing, edge, shop-floor, PLC, SCADA, MES, and control-room requirements are validated through safe simulation boundaries before any real-world integration. This skill prevents generated software from treating industrial operations as ordinary CRUD workflows. ## Use when Use this skill when a REQ touches manufacturing, industrial systems, shop-floor workflows, PLC, SCADA, MES, HMI, OPC UA, Modbus, MQTT, edge gateways, sensors, actuators, alarms, safety states, production lines, maintenance workflows, or control-room UI. ## Do not use when Do not use this skill for generic enterprise software with no industrial runtime, physical process, equipment, sensor, actuator, operator, or safety implication. ## Signals - The REQ mentions industrial, manufacturing, plant, factory, shop floor, PLC, SCADA, MES, HMI, OPC UA, Modbus, MQTT, edge, sensor, actuator, alarm, maintenance, downtime, line status, operator, or control room. - The selected pack is industrial-manufacturing or industrial-solution. - The selected design profile is industrial-control-room. - Acceptance criteria include real-time status, equipment state, alarms, or operator actions. ## Required behavior - Keep real equipment integration behind explicit adapters. - Provide simulator/fake device paths for local tests. - Treat write/control actions as high-risk and require explicit approval or simulation-only behavior unless the REQ explicitly